Philips FW390C - Manual (Page 22)

RECORDING CLOCK
§ CD Synchro Start Recording
1 Load a blank tape into tape deck 2 and a
disc into the disc tray.
2 Press CD to select CD mode.
— You can program the tracks in the
order you want them to be recorded
(see Programming Tracks). If not, the
tracks are recorded according to the
selected disc.
3 Press RECORD to start recording.
REC flag starts flashing.
• CD will start playback automatically.
4 Press ■ to stop recording.
Recording from other sources
(only on tape deck 2)
1 Load a blank tape into tape deck 2.
2 Press CD, TUNER or AUX
• Start playback of the selected source.
3 Press RECORD to start recording.
REC flag starts flashing.
4 Press ■ to stop recording.
Note:
- During recording, it is not possible to
listen to another sound source.
— " /u '-r'S PM" (the current time) will
be displayed.
— will be displayed if the
clock is not set.
Clock Setting
The clock is set in 12-hour mode, e.g.
" lc':Ou AM" or" lc':00 PM". Before
setting the clock, you must be in the View
Clock mode.
3 Set the minute with !◄ or ►!.
4 Press CLOCK*TIMER again to store the
setting.
— The clock starts running.
• To exit without storing the setting, press
■ .
Notes:
- During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
- When a power interruption occurs, the
clock setting is erased.
22