Philips FW390C - Manual (Page 18)

%fU
ShuffiG (only on remote control)
It will play all the available discs and their
tracks in random order. Shuffle may also be
used when tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE
-*• "5MUrrLC" will be displayed.
The SHUFFLE flag, the disc and the
track selected at random appear on
the display.
• The discs and the tracks will now be
played in random order until you press
STOP*CLEAR ■
• If you press REPEAT during shuffling,
the current track will be played
repeatedly.
- The REPEAT and SHUFFLE flags will
be displayed.
2 Press SHUFFLE again to resume normal
playback.
— The SHUFFLE flag disappears from
the display.
luracK
I
1 ' o..' I
STIREO
T I / ^ / c
o
I U I\l L f\
D:
0
:: AL SOU.\D CO.NTP.OL
; •> ^ J i [|D I (|
jfjQQg
Easy Set
EASY SET allows you to store all available
radio stations in a particular band (FM or
AM) automatically.
• Press and hold STANDBY'ON (on the
system onlylior 5 seconds; when the
system is in standby or demonstration
mode.
TRE T i " will be displayed and
18
followed by "TURTR".
— EASY SET will start with the last
active band.
All available radio stations with
sufficient signal strength will be
stored or until 40 presets are filled.
Notes:
- When EASY SET is used, all previously
stored radio stations will be erased.
- The last preset radio station will appear
on the display when EASY SET is
completed.
Tuning to radio stations
1 Press TUNER to select TUNER mode.
"TLIREf?" will be displayed.
A few seconds later, the current
frequency or the radio station name if
available will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM or AM.
3 Press TUNING ◄◄ or ►► for more than
one second, then release.
The display will show 'SEEIRCH'
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
TUNING or ►► until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER
2 Press TUNER (BAND) again to select
the desired waveband : FM or AM.
3 Press PROGRAM for more than one
second.
PROGRAM flag starts flashing and
■RL
' will be displayed.
Every available station for the
selected waveband will be stored
automatically. The frequency and
preset number will be displayed
briefly.
-* The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
The system will remain tuned to the
last stored preset radio station.
• Repeat the above procedure to store
other preset radio stations for the other
waveband. Remember to select the next
available preset number before
proceeding. If not, some of the preset
radio stations may be erased.
Notes:
- You can cancel the automatic
programming by pressing PROGRAM or
STOP^CLEAR M on the system only.