Tuning to preset radio stations, Loading a tape, Tape – Philips FW390C User Manual
Page 19: Tuner
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes:
- When 40 radio stations are stored and
you attempt to store another radio
station, the display will show
PPuGRnil FuLL If you want to
change an existing preset number;
repeat steps 4 and 5.
- You can cancel manual programming by
pressing STOP •CLEAR ■ on the
system only.
- During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
PRESET
T
or
A
to select the
desired preset number.
-* The preset number, frequency and
waveband appear on the display
TUNER
TAPE
Loading a tape
• Press
OPEN.
• The tape deck door opens.
• Load the tape with the open side
downward and the full spool to the left.
• Close the tape deck door.
19