Philips FW390C - Manual (Page 16)

1
Warning!
1) This system is designed for
conventional CDs. Do not use any
accessories like disc stabilizer
rings or CD treatment sheets, etc.,
which may damage the CD
mechanism.
2) Do not load more than one disc into
each tray.
3) When the CD changer is loaded
with CD(s), do not turn over or
shake the system. This may jam the
changer.
You can load up to three discs in the
CD changer for continuous playback
without interruption.
Discs for playback
This system can play all audio CD, finalized
audio CD-Recordable and finalized audio
CD-Rewritable format discs.
â COMPACT _n COMPACT R COMPACT
D@® iOi® iOiE
OIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO
IReWritablel
Loading the CD Changer
1 Press CD to select CD mode.
2 Press 0PEN«CL0SE
The CD compartment slides out.
3 Load a CD with the printed side up in
the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the DISC
CHANGE button.
— The CD changer carousel will rotate
until the empty tray is at the right
hand side and is ready for loading.
-* Playback will always start with the
disc in the outer right disc tray.
4 Press OPEN*CLOSE to close the CD
compartment.
-* The total number of tracks and
playing time of the last selected disc
appear on the display.
CD Direct Play
You can play a CD directly by pressing the
DISC 1, DISC 2 or DISC 3 button. The CD
player will stop at the end of playback of
the selected disc.
- When the button is lighted, it indicates
that there is a disc loaded in the disc
tray.
16
Playing a CD
1 Press PLAY ► to start playback.
The disc tray, track number and
elapsed playing time of the current
track appear on the display.
• To interrupt playback, press PAUSE I I .
The playing time flashes.
• To resume playback, press PLAY ►
again.
2 To stop playback, press STOP*CLEAR
■ .
Note:
-All the available discs will play once,
then stop. When the CD has stopped
playing, the system will switch to the
standby mode after 15 minutes if no
button is pressed.
Disc Change
You can change the outer 2 discs while the
third inner disc is at the stop or playing
mode.
1 Press DISC CHANGE
-*• The CD compartment slides out.
2
Replaced the discs in the left and right
disc trays.
• If you press DISC CHANGE again
during playback, the CD will stop
playing.
The CD carousel tray will rotate until
the inner tray is at the right hand side
and is ready for changing.
3 Press OPEN*CLOSE to close the CD
compartment.