Philips MATCHLINE 33CE7536 - Manual (Page 8)

0
Q
a
If no TV station is found, you can select
another system by pressing button
SYSTEM m.
• If the required TV station is found,
then select a programme number.
Press button V or A CH/PR to select
a programme number.
Note: You can give 90 TV stations a
programme number from 00 to 89.
If required, a name can be
programmed for the TV station found
(max. 5 positions).
• Press button (Q) <1 or I>, so that
the required letter or the required digit
are found:
• Press button ENTER -*>.
Select following letter or digit, etc.
Repeat the operation until the station
name has been stored.
In this way a name can be allocated to
a maximum of 34 TV stations.
Note: It is possible to call up the
programmed station names of TV
stations already adjusted via OSD (as a
check).
• Press button C3. The list appears on
the screen.
• Press button C3 again to switch off
OSD.
D.
• Press button D «» and keep it
pressed in until indicator PR no longer
flashes. The TV station, possibly with
the programmed station name, will now
be stored under the selected
programme number.
An extending red bar may also appear
in the top of your picture by way of
confirmation.
Searching for and storing
other TV stations
For searching and storing the
remaining TV stations (max. 90), repeat
operations A, B, C and D.
IT a
a
Calling up list
If required you can call up the list of the
possible programmed station names
with their corresponding programme
number.
• Press button C3 and keep it pressed
in until the list appears on the screen.
• Press button C3 again to switch off
OSD.
Erasing programmed TV
• Press button A (5>).
• Press buttons <1 !> (CD) at the same
time.
Five ‘stars’ now appear where the TV
station name was displayed.
• Press button D «».
An extending red bar may also appear
in the top of your picture by way of
confirmation.
The programme number and the
station name are now erased from the
OSD menu.