Interlogix TruVision Intelligent IP Dome Configuration Manual User Manual
Page 70
68
TruVision 12/32 Series IP Camera Configuration Manual
To set a preset tour:
1. In the PTZ control panel, click
to enter the tour settings interface.
2. Select a preset tour number from the drop-down list.
3. Click
to enter the adding interface of preset.
4. Configure the preset number, preset tour time and preset tour speed.
Preset Tour Duration:
The dwell time. The length of time in seconds for which a
camera stays at a preset before moving to the next preset.
Preset Tour Speed:
The speed the camera moves from one preset to another.
5. Click
OK
to save a preset into the preset tour.
6. Repeat the steps from 3 to 5 to add more presets.
7. Click
to save all the preset tour settings.
To call a preset tour:
In the PTZ control panel, select a defined preset tour from the drop-down list and click
to call the preset tour.