Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 49)

TruVision 12/32 Series IP Camera Configuration Manual 47
Figure 18: Snapshot menu
To set up scheduled snapshots:
1. From the menu toolbar, click Configuration > Storage > Snapshot .
2. Check Enable Timing Snapshot to enable continuous snapshots.
3. Select the desired format of the snapshot, such as JPEG.
4. Select the desired resolution and quality of the snapshot.
5. Enter the time interval between two snapshots. Select the unit of time from the drop-
down list: milliseconds, seconds, minutes, hour, or day.
6. Set the schedule for when you want snapshots to be taken. Click Edit and enter the
desired schedule for each day of the week.
Note: For the TVF-1104 camera, you cannot define a schedule for the timed
snapshots will occur.
7. Click Save to save changes.
To set up event-triggered snapshots:
1. From the menu toolbar, click Configuration > Storage > Snapshot .
2. Check Enable Event-triggered Snapshot to enable event-triggered snapshots.