Interlogix TruVision Intelligent IP Dome Configuration Manual - Manual (Page 51)

TruVision 12/32 Series IP Camera Configuration Manual 49
To set up a NAS system:
1. From the menu toolbar, click Configuration > Storage > NAS .
2. Enter the IP address of the network disk, and the NAS file path.
3. Click Save to save changes.
Storage devices
Use the storage management window to display the capacity, free space available, and
the working status of the HDD of the NAS and the SD card in the camera. You can also
format these storage devices.
Before formatting the storage device, stop all recording. Once formatting is completed,
reboot the camera otherwise the device will not function properly.
If Overwrite is enabled, the oldest files are overwritten when the storage becomes full.
Figure 20: Storage window
To format the storage devices:
1. From the menu toolbar, click Configuration > Storage > Storage Management .
2. Check the HDD Number column to select the storage.
3. Define the quota percentage for snapshots and recordings, modify the values for
each in Percentage of Snapshot and Percentage of Record .
4. Click Format . A window appears to check your formatting permission.
5. Click OK to start formatting.