IC Realtime 1.3 Megapixel 18X PTZ Network Camera with Up-to 300 ft IR (ICIPMP1808IR) - Manual (Page 7)

1
1 Features and Functions
1.1 General Introduction
This series IR network intelligent speed dome product is an integrated high intelligent speed dome. It adopts
new configuration design and is easy for the project construction. This is a digital and intelligent product of
vivid video. The installation is convenient.
Comparing with the previous series product, this series IR network intelligent speed dome has added some
new features. It supports 120M IR night vision, intelligent analytics, and the PTZ rotation speed can
automatically adjust according to the zoom rate of the lens. It supports various languages, real-time clock
function and protocol auto recognition. It supports 360° continuously pan, 100°tilt(-10°-90°) and 180° auto
flip. It can realize no blind spot monitor.
1.2 Features
This series speed dome has the following features:
1.2.1 On-Screen Menu
This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.
1.2.2 Proportional Pan and Tilt
This function keeps the image from moving too fast when there is a large amount of zoom.
The IR high definition speed dome continually decreases or increases pan and tilt speeds in proportion to
depth of zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms
speed is decreasing, the camera moving speed becomes fast.
1.2.3 On-screen Tips
Here you can view:
z Dome title and system version (Software and hardware)
z Dome system temperature. (Optional. You can disable this function)
z Dome pan/tilt coordinates, preset ID.
1.2.4 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.5 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed.
1.2.6 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses.
1.2.7 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.8 3D Privacy Masking
Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.