IC Realtime 1.3 Megapixel 18X PTZ Network Camera with Up-to 300 ft IR (ICIPMP1808IR) User Manual
Page 17
11
SYSTEM INFORMATION
ADDR INFORMATION
SET NORTH
LANGUAGE
FACTORY DEFAULT
RESTART
BACK EXIT
ADDR
：
001-S
BAUD RATE
：
9600
PARITY
：
NONE
SOFTWARE ：V1.02.0.RHNDDC
BACK EXIT
In the speed dome main menu, you can use the left/right button on the keyboard or in the speed dome
terminal menu to configure the system menu. Before setup, please move the cursor to the current item you
want to configure.
z
In main menu, please click confirm button to go to the sub menu or use left/right key to configure setup.
z
Use up/down button to select back option and then click confirm button to go back to the previous menu.
z
Use up/down button to select exit option and then click confirm button to log out system menu.
z
All setup here will not lose when encounter power failure.
4.4.1
System Information
Move the cursor to SYSTEM SETTING and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed
setup, please click save button to save current setup.
z
SYSTEM INFORMATION: Move the cursor to SYSTEM INFORMATION and then click confirm button
to go to the third submenu.
z
ADDR INFORMATION: Move the cursor to SITE INFORMATION and then click confirm button to go to
the third submenu.
z
SYSTEM TIME SETTING: Move the cursor to SYSTEM TIME SETTING and then click confirm button
to go to the third submenu.
z
SET NORTH DIRECTION: Set dome benchmark direction so that you can know the angel between the
benchmark and then current location. Please move the cursor to the option and then click confirm
button until you see O.K. Now you have set north direction.
z
LANGUAGE: The dome menu language. There are several languages for you to select. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
z
FACTORY DEFAULT: Restore dome factory default setup. Please move the cursor to the option and
then click confirm button until you see O.K. Now you can see the IP dome begin rebooting to restore
factory default setup.
z
RESTART: Reboot the speed dome.
z
BACK: Go back to the previous menu.
z
EXIT: Log out system menu.
4.4.1.1
System information
Move the cursor to SYSTEM INFORMATION and then click confirm button, you can see the above interface.
Here you can view dome basic information.
4.4.1.2 Address Information
ADDR TYPE ： SOFT
ADDR-SOFT ：001
BACK EXIT