IC Realtime 1.3 Megapixel 18X PTZ Network Camera with Up-to 300 ft IR (ICIPMP1808IR) - Manual (Page 24)

18
PRESET
AUTO PAN
AUTO SCAN
TOUR
PATTERN
IDLE FUNCTION
TIME TASK
NEXT PAGE
BACK EXIT
DIGITAL ZOOM :：OFF
DZOOM LIMIT ：X3
PICTURE FLIP ：OFF
FREEZE FUNC ：OFF
STABLE ：OFF
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK EXIT
z DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
z DZOOM LIMIT: Here you can set the threshold of the digital zoom.
z PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z STABLE : it is to reduce the effect of the vibration on the camera
z CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z BACK: Go back to previous menu.
z EXIT: Log out system menu.
4.4.4 Function Setting
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
z
PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
z AUTO PAN: Move the cursor to PAN and then click confirm button to go to the third submenu.
z AUTO SCAN: Move the cursor to SCAN and then click confirm button to go to the third submenu.
z TOUR: Move the cursor to TOUR and then click confirm button to go to the third submenu.
z PATTERN: Move the cursor to PATTERN and then click confirm button to go to the third submenu.
z IDLE FUNCTION: Move the cursor to IDLE FUNCITON and then click confirm button to go to the third
submenu.
z TIME TASK: Move the cursor to TIME TASK and then click confirm button to go to the third submenu.
z NEXT PAGE: It includes: PRIVACY MASKING, PTZ SPEED, SET ZERO, POWER UP, MENU
PASSWORD, MENU IDEL, PTZ AUTO STOP, HEATER CONTROL and PTZ CORRECTION. Move
the cursor to the item and then click the confirm button to set. .