IC Realtime 600TVL / 650TVL 23X High Speed PTZ Camera with 250' IR User Manual
Page 30
23
SCAN NO ： 001
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED ：160
RUN
STOP
BACK
EXIT
Move the cursor to PAN button and then click confirm button to go to setup interface.
z
PAN SPEED: Set dome rotation speed. The Value ranges from 1 to 255. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
z
RUN: Move the cursor to call item and then click confirm button. The dome begins 360 degrees
continuous rotation.
z
STOP: Highlight stop item and then click confirm button. The dome stops rotation.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.3 Scan
Move the cursor to SCAN button and then click confirm button.
z
SCAN
NO
：Here is to set auto scan number. The value ranges from 1 to 5. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
SET LEFT LIMIT
：Here is to set camera left address. Click confirm button to save current setup.
z
SET
RIGHT
LIMIT
：Here is to set camera right address. Click confirm button to save current setup.
z
SCAN SPEED: The value ranges from 1 to 255. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
z
RUN: Please input auto scan number first, and then please move the cursor to RUN and click confirm
button to activate auto scan function.
z
STOP: Here is to terminate auto scan function.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
4.4.4.4 Cruise (Touring)
Move the cursor to highlight CRUISE item and then click confirm button to go to set interface.
z
CRUISE
NO
：Here is to ser tour number. The value ranges from 1 to 8. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
CRUISE NO： : 001
CRUISE SETTING
DELETE CRUISE
RUN
STOP
BACK
EXIT