HONDA 2012 Crosstour - Owner's Manual - Manual (Page 89)

Push and hold the rear of the
master door lock switch on the
driver’s door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position.
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
Make sure the shift lever is in the
Park (P) position.
Or, until you hear two more
clicks (after about 10 seconds)
to activate
.
Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
1.
2.
1.
2.
3.
4.
driver’s door unlock
feature.
Unlocks the driver’s door or all doors
and tailgate when the shift lever is
moved to Park (P) position with the
brake pedal depressed.
Unlocks the driver’s door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
all doors and tailgate
unlock feature
CONTINUED
To program the Park Unlock mode: To program the Ignition
Door Locks
85
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
Switch Unlock mode:
2012 Crosstour