HONDA 2012 Crosstour - Owner's Manual User Manual

Page 150

You can store up to 12

preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.

To store a channel:

Press the

button. Either

XM1 or XM2 will show in the
display.

Use the selector knob, or the
CATEGORY bar or SCAN button
to tune to a desired channel.

Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.

Repeat steps 2 and 3 to store the
first six channels.

Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.

Once a channel is stored, simply
press and release the proper preset
button to tune to it.

The encryption

code is being updated. Wait until the
encryption code is fully updated.
Channels 0 and 1 should still work
normally.

The signal is

currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.

The selected channel

number does not exist, or is not part
of your subscription, or this channel
has no artist or title information at
this time.

XM is loading the

audio or program information.

The channel

currently selected is no longer
broadcasting.

There is a problem

with the XM antenna. Please consult
your dealer.

The selected

channel has no artist or title
information at this time.

In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.

Preset

XM Radio Display Messages

‘‘UPDATING’’

‘‘NO SIGNAL’’

‘‘ - - - - ’’

‘‘LOADING’’

‘‘OFF AIR’’

‘‘ANTENNA’’

‘‘NO INFO’’

Playing the XM Radio

(Models without navigation system)

146

Fe
a

2012 Crosstour