Instrument panel indicators, 2012 crosstour – HONDA 2012 Crosstour - Owner's Manual User Manual
Page 66
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It
reminds you that it is time to take
your vehicle in for scheduled
maintenance. The maintenance main
items and sub items will be displayed
in the information display. See page
for more information on the
Maintenance Minder .
This indicator goes off when your
dealer resets it after completing the
required maintenance service.
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button (see
page
).
This indicator comes on when you
set the cruise control. See page
for information on operating the
cruise control.
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key. If it is not a properly
coded key, the indicator will blink,
and the engine’s fuel system will be
disabled (see page
).
This indicator comes on when the
washer fluid level is low. Add washer
fluid when you see this indicator
(see page
).
This indicator comes on when you
turn on the fog lights. For more
information, see page
.
Canadian models only
Immobilizer System
Indicator
Maintenance Minder
Indicator
Cruise Control Indicator
Washer Level Indicator
Cruise Control
Fog Light Indicator
Instrument Panel Indicators
62
TM
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
Main Indicator
2012 Crosstour