beautypg.com

Lights, 2012 crosstour – HONDA 2012 Crosstour - Owner's Manual User Manual

Page 355

background image

Pull down the under cover from
the bumper carefully.

Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.

Remove the bulb by turning it
about one-quarter turn
counterclockwise.

Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.

The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustment should be done by your
dealer or another qualified
technician.

Remove the three holding clips
with a flat-tip screwdriver.

1.

2.

3.

CONTINUED

Passenger’s side

Replacing a Fog Light Bulb

Lights

351

ELECTRICAL
CONNECTOR

TAB

UNDER COVER

BULB

HOLDING CLIPS

Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.

Ma

int
e

na
nce

2012 Crosstour