beautypg.com

Lights, 2012 crosstour – HONDA 2012 Crosstour - Owner's Manual User Manual

Page 351

background image

Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.

To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.

Open the hood.

To change the turn signal bulb on
the passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.

To change a bulb on the driver’s side,
remove the fastener with a flat-tip
screwdriver, and remove the splash
separator by pushing the tab. Then
remove the duct.

1.

2.

3.

CONTINUED

Lights

Replacing a Front Turn Signal/
Parking Light Bulb

347

STAY

DUCT

TAB

BULB

SOCKET

SPLASH
SEPARATOR

FASTENER

Ma

int
e

na
nce

2012 Crosstour