HONDA 2012 Crosstour - Owner's Manual - Manual (Page 142)

Each preset button can
store one frequency on AM and two
frequencies on FM.
If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
You will see a ‘‘0’’ displayed after
pressing a preset button if auto
select cannot find a strong station for
that preset button.
If you do not like the stations auto
select has stored, you can store
other frequencies on the preset
buttons as previously described.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
Press the A. SEL button. ‘‘A-SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM and twelve FM stations in
the preset buttons.
For information on FM/AM radio
frequencies and reception, see
.
Select the desired band, AM or
FM. FM1 and FM2 let you store
six stations each.
Use the tune, skip, scan, or RDS
function to tune the radio to a
desired station.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Pick a preset button, then press
and hold it until you hear a beep.
1.
2.
3.
4.
To turn off auto select Preset AUTO SELECT
Playing the FM/AM Radio (Models without navigation system)
138
page 231
Fe
a
tu
re
s
2012 Crosstour