HONDA 2012 Crosstour - Owner's Manual User Manual

Page 189

CONTINUED

The scan function samples all
stations with strong signals on the
selected RDS category. To activate it,
press and release the SCAN side of
the SCAN/A.SEL bar. You will see
SCAN in the center display. The
system will scan for a station with a
strong signal in the selected RDS
category. You will also see the
selected RDS category name
blinking in the center display while
searching it. When the system finds
one, it will stop and play that station
for about 10 seconds.

Turn the knob to the desired RDS
category.

While the RDS category is selected,
move the selector knob to the right
to select SEEK in the upper right
corner of the screen. Then press
ENTER to activate the seek function.

This function searches up and down
a frequency for the strongest signal
from the frequencies that carry the
selected RDS category information.
This can help you to find a station in
your favorite category. To activate it,
press and release either side
(

) of the SKIP bar. You

will also see the selected RDS
category name blinking in the center
display while searching it. When the
system finds a station, the selected
RDS category name will be displayed
again for about 5 seconds in the
center display.

If the system does not find a station,
‘‘NOTHING’’ blinks for about five
seconds, then the system goes back
to the last selected station.

To activate RDS program search
with the interface dial, push the
AUDIO button to display the FM
radio information on the screen.
Push the selector down, and turn the
knob to select the RDS SEARCH
icon. Press ENTER on the selector.
The screen shows you the RDS
program category list.

Playing the FM/AM Radio

(Models with navigation system)

RDS Program Search

RDS Program SCAN

185

SEEK/SCAN ICON

SEEK is selected.

RDS CATEGORY LIST

Fe
a

2012 Crosstour