HONDA 2012 Crosstour - Owner's Manual User Manual

Page 184

The skip (seek)

function searches up and down from
the current frequency to find a
station with a strong signal. To
activate it, press either side (

) of the SKIP bar, then release

it. You can also activate the skip
function (SEEK is displayed on the
screen) by pushing the interface
selector to the right or left.

The SCAN function

samples all stations with strong
signals on the selected band. To
activate it, press the SCAN side of
the SCAN/A.SEL bar, then release it.

To scan with the interface dial, push
the selector down, and then push it
to the right. You will see SCAN
flashing on the screen.

Use the TUNE bar to tune

the radio to a desired frequency.
Press the right side of the bar to
tune to a higher frequency, or the
left side to tune to a lower frequency.
To tune with the interface dial, push
the selector down, and turn the knob
to the TUNE icon. Then press
ENTER on the selector, and turn the
knob to the desired frequency. To
exit the TUNE mode, press ENTER
on the selector, then push the
selector up.

SKIP (SEEK)

SCAN

TUNE

Playing the FM/AM Radio

(Models with navigation system)

180

SCAN ICON

TUNE ICON

Fe
a

2012 Crosstour