HONDA 2012 Crosstour - Owner's Manual - Manual (Page 105)

Store a driver’s seat position only
when the vehicle is parked.
Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
Adjust the seat to a comfortable
position (see page
).
Adjust the outside mirrors for best
visibility (see page
).
Two seat and outside mirror
positions can be stored in separate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
Your vehicle has a memory feature
for the driver’s seat and outside
mirror positions.
Press and release the SET button.
You will hear a beep. Immediately
press and hold one of the memory
buttons (1 or 2) until you hear two
beeps. The indicator in the
memory button will come on. The
current position of the driver’s
seat and outside mirrors are now
stored.
1.
2.
3.
4.
93
105
CONTINUED
EX-L models Storing a Driving Position
Driving Position Memory System
101
MEMORY BUTTONS SET BUTTON
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
in Memory
2012 Crosstour