beautypg.com

Installing a child seat, 2012 crosstour – HONDA 2012 Crosstour - Owner's Manual User Manual

Page 49

background image

After confirming that the belt is
locked, grab the shoulder part of
the belt near the buckle, and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.

To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract.

Push and pull the child seat
forward and from side-to-side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.

To remove slack, it may help to
put weight on the child seat, or
push on the back of the seat while
pulling up on the belt.

4.

5.

Installing a Child Seat

45

Dr
iv

er
and

P

asseng

er
Saf

e

ty

2012 Crosstour