Haltech Platinum Pro 350z - Manual (Page 34)

User Manual – Haltech 350Z
blue arrow. The current selection size is indicated in the top right hand corner, with the currently selected cells
value shown on the left.
The Output Value shown in the bottom right of the display indicates the value that this table is producing. This
value is linked to this table only and may not represent the final value used by the ECU, as correction tables may
affect any final values.
The 3D table can be rotated to provide a better angle of the surface by using the left mouse button. The surface
can be reset back to the default angle at any time by clicking on the return to default angle button located in the
top right hand corner.
7.6.9 Target
The Target display allows the user to see the position of the engine in relation to the currently selected tuning
table cell. As the current engine position approaches the selected cell, the cursor in the target display will be
shown as a red circle. If the cursor becomes closely aligned, the cursor will highlight green. When the cursor is
green, any changes made will affect the current running of the engine. At any time the selected cell can be aligned
with the current engine position by using the spacebar.
Figure1. The target display
Figure1. The selected cell aligned with the current engine position
1.0 Page 34 of 42