Haltech Platinum Pro 350z - Manual (Page 16)

User Manual – Haltech 350Z
WARNING:
THE CURRENT CONTROL MUST BE SET CORRECTLTY. EXCESSIVE
CURRENT PASSED THROUGH AN INJECTOR LOAD FOR A LONG
PERIOD OF TIME MAY DAMAGE THE INJECTORS
5.6 Trim Settings
Injector Trim Tables: This allows the injector trim tables to be enabled and viewed in the ECU Navigator.
Ignition Trim Tables: This allows the ignition trim tables to be enabled and viewed in the ECU
Navigator.
Figure 8: The Input/Output Setup window
5.7 Generic Output settings
The Generic Output can be used as a user definable switch that will activate when the enabled conditions are true.
Up to three conditions can be used, with the ability to combine conditions using the "And" "Or" operations. When
conditions are combined, please note that operations will be performed in order from top to bottom. .eg If we
wanted a warning light, that was active when the RPM was over 1000 and coolant or knock readings were high
we could set the conditions as follows:
Knock > 90
or
Coolant > 99
And
RPM > 1000
1.0 Page 16 of 42