GTCO Summagraphics ADB Interface - Users Guide - Manual (Page 4)

Summagraphics 4
 9600 baud
 Even or odd parity
 Two stop bits
 Echo off
 Proximity Transmission on, “always transmit”
 1000 lpi fixed resolution
 Binary format
 Stream Mode on
 UIOF format
Summagrid III DIP Switch Settings
1 2 3 4 5 6 7 8
Set A ON OFF OFF ON ON ON OFF OFF
Set B OFF ON ON OFF OFF ON OFF OFF
Set C ON ON OFF ON * * * *
*factory set
2. Connect the tablet to the ADB adapter box.
The ADB kit contains a PC cable with a 25-pin D connector and a phone connector.
Plug the 25-pin D connector of the PC cable into the RS-232 port on the Summagrid
III controller.