GTCO Roll-Up III - Users Guide - Manual (Page 6)

Roll-Up III 6
supplied TabletWorks CD supports reduced functionality Wintab and TabCon-compatible
applications. If you are not sure which drivers are required, check the Table 1 section of
this manual or consult with your application vendor. A driver does not need to be installed
if you are using Roll-Up III with GTCO CalComp by Turning Technologies QuikRuler III™.
Configuring Non-Wintab Applications
Many application programs provide configuration information for specific digitizers. If the
Roll-Up III digitizer is not listed, you can use the configuration for GTCO CalComp by
Turning Technologies Digi-Pad Type 5 or Type 5A (T5/T5A), Roll-Up II, CalComp 9100/9500,
or Summagraphics Microgrid III or ID Series.
Installing the TabletWorks Driver
Insert the CD into the CD-ROM drive on your computer. The installer will autoload. If it
does not, click on the Start button on the Windows Task Bar and select Run from the
menu. Type X:\setup.exe (X represents the CD drive letter). Follow the onscreen prompts
to complete the installation.
A TabletWorks icon will display in the System Tray on the Windows Task Bar. Right
click on the icon to display the TabletWorks Menu, which provides access to all the
TabletWorks features.
Hardware Configuration
When you use the USB interface, no data output configuration is required. However, when
you choose the optional serial interface, the Roll-Up III must be configured to send data in a
format that is compatible with the application software. Different applications have
different requirements when interacting with a digitizer. Roll-Up III is designed to provide
the appropriate serial requirements for a wide variety of graphic, CAD and estimating
applications using a simple code system. The SuperSet Menu on the surface of the Roll-Up
III is used to enter the appropriate code for the software being used. A table in the Using
the SuperSet Menu section of this manual lists the SuperSet Codes for a wide variety of
applications.
Determine if you have not already, which communication connection you will be using –
USB or Serial.
NOTE: Conductive materials, inks or electronic devices on, under or near the Roll-Up III can
cause improper operation. See the Troubleshooting section for more details.