Golden Lighting 8201-M1L BLK User Manual
Parts & assembly sheet, Parts list
Mounting Strap
Mounting Screw
Mounting
Screw
1ea L104*W24*H11mm
2ea 8/32-IP*H1"
2ea 5/32-IP*H1-1/2"
Hex Nut
Wire Connector
Finial
2ea 5/32-IP*H3mm
3 ea A3 Orange
2ea 3/8-IP*H9mm
Canopy
Rod
Rod
1ea
∮
127Dia*H20mm
3ea 12.7mmDia* H12“
1ea 12.7mmDia*
H6”
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS LIST
Crystal Drops Bx 8pcs
For Customer Service, contact the place of purchase to arrange for replacement parts.
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review Installation Instruction Sheet, but do
not install before assembling the fixture as per the
instructions below.
8201-M1L BLK/SLV
PARTS & ASSEMBLY SHEET
Fixture Name: Tetiva 8201-M1L BLK/SLV
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
1. Measure to determine the correct number of rods
needed for proper hanging height.
* This fixture includes 4 rods (6", 12", 12", 12")
2. To shorten the fixture, slide the excess rods off the
wires. To lengthen add additional rods.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
These three Rods (H,
I, and J) may be
removed
or
additional Rods
may be added.
G
H
I
J
F