Golden Lighting 6005-10 RBZ - Manual

Canopy Wire connectors Canopy loop
1ea 10"x 4.5" 2ea P3 Orange 2ea @3/8 x 29mm
Chain
Junction Box
Screw
Socket Washer
2ea 6ft x3.8mm 2ea 8/32" x 1" 3ea @55 x 1mm
Chain connector Deco nut Nipple
2ea @4X55mm 1ea @15 x 12mm 1ea @3/8 x 45mm
Mounting Strap w/
ground screw
Hex Nut Srping Washer
1ea 3/4"X4" 2ea @3/8 x 3mm 1ea @15 x 3mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Fig. 1
NOTE: INSTALL THE GLASS ASSEMBLY AFTER THE
FIXTURE IS HUNG.
PARTS & ASSEMBLY SHEET
6005-10
Read and review installation instruction sheet before
assembling the fixture.
F IXTURE A SSEMBLY I NSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Lancaster 6005-10 PW/RBZ
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig. 1)
1. By measuring determine correct number of links needed
for proper hanging height. Use a pair of pliers to open one
link of the Chain (I) then remove the excess chain (I) and
discard it.
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
G
H
J
K
L
M
F
I
H
6005-10 Parts Installation-100916m.xls