Golden Lighting 3071-M3 GG - Manual

Canopy Wire Connectors Top Loop
1ea 5-5/8"W× 2-5/8"H 3ea A4 Orange 1ea D50mm×H60mm
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain
Connector
Nipple
2ea @4.X50mm 1ea @3/8 x 40mm x 5mm 1ea @1/2 x 75mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @1/2 x 4mm Decorative chains 3ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Note: The Canopy, Chain, and Twisted Candles
are preassembled onto the fixture body.
1. Place Top Cap (M) over the threaded nipple
of Top Loop (J) and twist until snug. Then hook to
attach and hang Decorative Chains (K).
Fig. 1
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
3071-M3 GG
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
Fixture Name: Athena 3071-M3 GG
This fixture assembled PO:__________ Date: ________
J
M
K