Philips CDC 936 - Manual (Page 17)

PERSONAL PRESETS ®
In the PRESETS nnode you can store your preferred settings for a number of functions in the player's memory.
All settings will remain stored in the memory, even if you switch it off.
PRESETS RETIRE lights up if you press a 'wrong' key while storing settings.
OPENING THE PRESETS MEMORY (PRES)___________________________________________________
• Press PRES(ets) 8 .
- PRESETS FADER-SPACE-SCfiN-PLAT appears on the display.
• You can now set the following functions in any required order:
£
.!2
"5)
c
u
FADE-IN AND FADE-OUT TIME (FADER)______________
• Press FADER 24.
- FRDE lights up with next to it the set fade-in/fade-out time.
Default time is five seconds.
PLAY MODE (PLAY/REPLAY) •
• Select the required fade-in/fade-out time using or
16; minimum 2two seconds and maximum 10 seconds.
- The fade-in/fade-out time has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
EXTRA PAUSE (AUTO SPACE)_____________________
• Press AUTO SPACE 9.
- SPREE lights up with next to it the set pause time.
Default time is four seconds.
• Select the required pause time using ►►i or 16;
minimum 0 seconds and maximum nine seconds.
- The pause time has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
Depending on what play mode you select, after switching on
the changer, play will automatically begin with:
- all CDs (PLAY);
- the tracks of the'CDs in a random order (SHUFFLE);
- the FTS programmes of the CDs (FTSP);
- the FTS programmes in a random order (FT55);
If you select STOP, then you must start play yourself with
PLAY/REPLAY
18. SHUFFLE 20 or SCAN 22.
• Press PLAY/REPLAY 18.
- The display shows the last selected play mode.
Default setting is PLAY.
• Select the required play mode using or 16;
PLAY, SHUFFLE, FTS P(lay), FTS S(huffle) or STOP.
- The play mode has now been set.
• Select the next setting or press STOP/CP 77or PRESETS 8
to go back to STOP mode.
SCAN TIME (SCAN)
• Press SCAN 22.
- SCAN lights up with next to it the set pause time.
Default time is 10 seconds.
• Select the required scan time using or 16;
minimum 10 seconds and maximum 19 seconds.
- The scan time has now been set.
• Select the next setting or press STOP/CP 77 or PRESETS 8
to go back to STOP mode.
17