Futaba 3PK - Manual (Page 15)

Levels LV1, LV2, LV3 Model and User Names MDL-NAME, USR-NAME
DEFINITION: Provides a 10-character name for each of the model memories in
the transmitter to easily select the correct setup for the model currently in use.
Also provides a 10-character user name that is constant to all model memories.
AVAILABLE FOR: M1-M10 in transmitter memory, E11-E20 if using optional CAMPac.
ADJUSTABILITY: Includes 0-9, A-Z and numerous symbols.
INTERACTIONS: Model name is reset to factory default with model reset, and
copied with model copy.
DESIRED END RESULT:
•
Clearly label each model for easy selection.
•
User name can be set to display on home screen (see SYSTEM, p. 13) for easy
confirmation of radio ownership.
CAUTIONS:
•
User name is constant across all model memories, so changing it changes it system-wide.
•
Model names may be the same between models; model # will still be displayed and will still be different.
15
GOAL:
Rename the current model FUTABA-1,
while using the
LV1 programming menus. (If
set to more complex menus, scroll through
menus with Up button until
MDL-NAME is
displayed on screen.)
Where next?
STEPS:
Open and select menu 1.
Select MDL-NAME.
Change first character to F.
Move to the second letter.
Repeat steps above to change name.
Close.
INPUTS:
7 times to F.
6 times to U.
16 times to T. Repeat.
Adjust the user name ( USR-NAME): repeat steps above, but past model name to
user name and edit each character.
Copy the model (
MDL-COPY): See p. 33.
Select modulation (FM/PCM/HRS) ( MOD-MODE): See p. 16. (Hint: remember to power
off and back on to begin transmitting in new modulation.)
Channel reversing (
CH-REV): See p. 18.