FingerTec m-Kadex Manual - Manual (Page 11)

11 CONTENTS
HOW TO CHANGE IP ADDRESS
Terminal does not have a keypad thus to change the IP address users can do it via In-
gress software. Steps to change IP address via Ingress are as below. Go to Doors tab and
click on
Add Door .
Once the door is added, click on Add Device at the Doors tab. Check/Tick the terminal(s)
to be added to the specific door. Click OK . Double click on the device. At the Network
tab, click Edit . Change the desired IP address at the IP Address / URL column. When
done, click Save to confirm the changes made.