Chapter 1, Getting, Started – FingerTec Q2i Manual User Manual
Page 3: Viewing the user guide in the internet, Terminal included accessories, Included printed materials, Activating, Terminal, Registering
USB Extension
To connect to the USB port
of a computer for uploading
and downloading of data.
RFID Cards (5 pieces)
For card enrollment and
verifi cation.
DC 12V Power Adaptor
Connect the power adapter to the terminal
and plug it into a standard power outlet to
charge the terminal.
Cat 5 Cable
Connect the CAT5 to the terminal and
another end for LAN connection.
Q2i
Screwdriver
Use the screwdriver to open
the back plate of fi ngerprint
terminal and to install the back
plate against a wall.
A Packet of Bolts
Use the screws to hold the
back plate of the terminal
against a wall.
1•
GETTING STARTED
Viewing the User Guide in the Internet
The User Guide is available in the package when you purchased the terminal. The User
Guide is also available online at
fingertec.com
and
user.fingertec.com
. Choose the lan-
guage that you prefer for your User Guide.
Terminal Included Accessories
Do not abuse the fingerprint sensor by scratching the surface, contacting the sen-
sor’s surface with heat, pressing hard during placement of fingerprint for verifica-
tion. Clean the sensor occasionally with microfiber cloth to maintain the perform-
ance of the sensor.