FIAT 2013 500 User Manual

Page 91

wording “TUNER Mute” will be shown on the display
(in radio mode) or “CD Pause” (in CD mode).

Press the

button again to deactivate the MUTE

function. The volume will gradually increase until it
reaches the previously set level.

When the volume level is changed using the dedicated
controls, the Mute function is deactivated and the vol-
ume is adjusted to the new level selected.

Audio Adjustment
The functions that can be selected from the audio menu
change depending on the context: AM/FM/MEDIA/
SATELLITE.

Press the AUDIO button briefly to change the Audio
functions. After the AUDIO button is first pressed, the
display will show the bass level value for the source
activated at that time (e.g. in FM mode the display will
show the wording “FM Bass +2”).

Use the buttons

to scroll through the Menu

functions. To change the setting of the selected function,
use the

buttons.

The current status of the selected function appears on the
display.

The functions managed by the Audio Menu are:

• BASS (bass adjustment);

• TREBLE (treble adjustment);

• BALANCE (right/left balance adjustment);

• FADER (front/rear balance adjustment);

• LOUDNESS

(LOUDNESS

function

activation/

deactivation);

• EQUALIZER — if equipped (activation and selection

of factory equalization adjustments);

• USER EQUALIZER — if equipped (customized equal-

ization adjustment).

Tone Adjustment
Proceed as follows:

• Press AUDIO Button,

• Use the button

to select “Bass” or “Treble”

in the AUDIO menu;

• press the

button or to increase/decrease

the bass or treble adjustments.

By pressing the

buttons briefly, the levels

will change progressively. By pressing them down longer,
the levels will change quickly.

Balance Adjustment
Proceed as follows:

• Press AUDIO Button,

• Use the button

to set “Balance” in the

AUDIO menu;

• press the

button to increase the sound from the

right speakers or the

button to increase the sound

from the left speakers.

By pressing the

buttons briefly, the levels

will change progressively. By pressing them down longer,
the levels will change quickly.

Select the value “0” to set the right and left audio outputs
at the same level.

Fader Adjustment
Proceed as follows:

• Press AUDIO Button,

• Use the button

to set “Fader” in the

AUDIO menu;