FIAT 2013 500 User Manual

Page 83

• Briefly press the MENU ESC button to go back to the

menu screen or press and hold the MENU ESC button
(approximately one seconds) to go back to the main
screen without storing settings.

Trip B Data (Trip B On)
Through this option it is possible to activate (On) or
deactivate (Off) the Trip B (partial trip) display.

For further information see “Trip Computer”.

For activation / deactivation, proceed as follows:

• Briefly press the MENU ESC button (On) or (Off) will

flash on the display (according to previous setting);

• Press the + or – button for setting;

• Briefly press the MENU ESC button to go back to the

menu screen or press and hold the MENU ESC button
(approximately one seconds) to go back to the main
screen without storing settings.

Set Time (Clock)
This function may be used to set the clock through two
sub-menu items: “Time” and “Mode”.

Proceed as follows:

• Briefly press the MENU ESC button, the display will

show the two sub-menu items“Time” and “Mode”;

• Press the + or – button to navigate the two sub-menu

items;

• Select the required option and then press the MENU

ESC

button;

• When accessing the “Time” sub-menu item: briefly

press the MENU ESC button, “hours” will flash on the
display;

• Press the + or – button for setting;

• Briefly press the MENU ESC button, “minutes” will

flash on the display;

• Press the + or – button for setting.

NOTE:
• The setting will increase or decrease by one unit each

time the + or – button is pressed. Press and hold the
button to increase/decrease the setting rapidly. Com-
plete the setting by briefly pressing the button when
you approach the required setting.

• Briefly press the MENU ESC button to return to the

“Time” sub-function.

• When accessing the “Mode” submenu: briefly press

the MENU ESC button, the previously set display
format will flash on the display;

• Press the + or – button to select “24h” or “12h”.

When you have made the required settings, briefly press
the MENU ESC button to go back to the Time, Mode

sub-menu screen or press and hold the MENU ESC
button (approximately one seconds) to go back to the
main screen without storing settings.

• Press and hold the MENU ESC button to go back to

the main screen or main menu (settings are stored).

Set Date
This function may be used to set the date (day - month -
year).

To change the date proceed as follows:

• Briefly press the MENU ESC button “year” will flash

on the display;

• Press the + or – button for setting;

• Briefly press the MENU ESC button “month” will

flash on the display;

• Press the + or – button for setting;