FIAT 2013 500 - Manual (Page 80)

• Button Volume
• Hill Start
• Daylights (D.R.L.)
• Exit Menu
Selecting An Option Of The Main Menu Without
Submenu:
• Briefly press the MENU ESC button to select the main
menu option to set;
• Press the + or – button (by single presses) to select the
new setting;
• Briefly press the MENU ESC button to store the new
setting and go back to the main menu option previ-
ously selected.
Selecting An Option Of The Main Menu With
Submenu:
• Briefly press the MENU ESC button to display the first
submenu option;
• Press the + or – button (by single presses) to scroll all
the submenu options;
• Briefly press the MENU ESC button to select the
displayed submenu option and to open the relevant
setup menu;
• Press the + or – button (by single presses) to select the
new setting for this submenu option;
• Briefly press the MENU ESC button to store the new
setting and to go back to the previously selected
submenu option.
3
• Press and hold the MENU ESC button to return to the
main menu (short hold) or the main screen (longer
hold).
Change Engine Oil Indicator System
Change Engine Oil
Your vehicle is equipped with an engine oil change
indicator system. The “Change Engine Oil” message will
flash in the EVIC display for approximately 10 seconds
after a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the MENU/ESC button. To reset the oil change
indicator system (after performing the scheduled main-
tenance) refer to the following procedure.
1. Turn the ignition switch to the ON position (Do not
start the engine).
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illuminates when you
start the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Trip Computer
The Trip Computer is located in the instrument cluster. It
features a driver-interactive display (displays informa-
tion such as and trip information, range, fuel consump-
tion, average speed and travel time).
4