Ecler AmicLab - Manual (Page 17)

17
5.10. Fully displayed panel
Fully displayed channel panel graphically shows parameters related to the channel audio
processing function offered by .amic (see paragraph Features).
A fully displayed processing channel panel displays all editable parameters, grouped in sections.
5.10.1. INPUT
Input section contains INPUT SELECT, INPUT GAIN, MUTE
and INVERT parameters plus a level meter graphical display.
 INPUT SELECT selects this channel input amongst available
sources. Options are "Input Ch1", "Input Ch2", "Input Ch1+Ch2"
(sum of the input channels) or "Signal Gen.". This last one refers
to an internally generated signal through the signal generator
controls from the main panel.
 INPUT GAIN is made of a fader and a linked numerical value.
With this parameter you can apply a gain up to +12dB or an
attenuation up to –84dB to the selected input signal.
 MUTE allows software to mute audio.
 INVERT changes the input signal phase (of 180 degrees).
Level meters display the channel input signal level after gain and
the output signal after all processing (when .amiclab is connected with
hardware). Used scale is the silk printed one on the fader.