Ecler AmicLab - Manual (Page 11)

11
 STORE sends the currently edited preset to .amic hardware (to become the automatically
extracted preset from hardware). This is only available if .amiclab is connected with the
hardware. During the store process, a progress dialog box is displayed to provide feedback of the
operation progress.
 PASSWORD opens a dialog box allowing to change .amic hardware access password. This is
only available if .amiclab is connected with the hardware.
You can choose a blank (no character) password if you don't want the program to open this
password dialog box when hardware is connected.
 FIRMWARE is used to update .amic firmware (internal code). An Ecler supplied file with "fw"
extension is used to update firmware (visit our web site to download the last version). Executing
this command opens a Windows® typical file selection dialog box.
This is only available if .amiclab is not connected with the hardware ("CONNECT" button
deactivated).
If hardware is password protected, a password dialog box opens to type the password and
validate the operation.