Ecler AmicLab User Manual

Page 12

"Reset" button cancels the current password if you lost or forgot it (see CONNECT button

section).

During the updating process, a progress dialog box is displayed to provide feedback of the

operation progress.

If an error occurs at any time during these operations, a warning message appears in a dialog

box to inform the user.

5.8.2. CONNECT button

CONNECT button is used to open/close a

connection between .amic and the software.

When .amiclab is not connected with .amic,

CONNECT button is deactivated and greyed. On
the other hand, when .amiclab is connected with
the hardware, the button is lit in variable intensity
red signalling its active status.

In order to avoid clicks and noise when communication is established software mutes the sound

the time for the parameters to be send from the editor (with their current value).

If hardware is password protected, a password dialog box opens to type the password and

validate the operation.

This manual is related to the following products:

Amic