Using the button – Canon A470 User Manual

Page 97

Va
rio
u

S
h

oo
ti

ng
Met

od
s

Using the

Button

Press the

button.

•

:The Face Select mode activates.

•

The settings advance each time the

button

is pressed.

•

: The corresponding setup screen is displayed.

•

The white balance data is read each time the

button

is pressed. Since the frame does not appear at this point,
ensure that the white paper or cloth is positioned so it appears
at the center of the LCD monitor and then press the

button. After using this function once, the white balance setting
changes to the custom white balance setting.

•

The LCD monitor turns off when you press the

button. It powers back on when you press a button other than
the power button or when you change the camera’s vertical/
horizontal orientation.

•

: The

button can be used in place of the shutter button

when the camera is held vertically.

Vertical Shutter Release

With the camera held vertically, you can release the shutter by
pressing the

button in place of the shutter button.

z The

button will behave as follows.

- Lights: Vertical release available
- Blinks: Movie recording in progress

z When the camera focuses, it will beep twice and record the image

immediately (The

button does not need to be pressed

halfway).

z When the vertical shutter release function is registered to the

button, images cannot be added to the print list even when the

button is pressed

(p. 19)

z You can also shoot using the shutter button.