Canon A470 - Manual (Page 106)

104
Use this feature to automatically play back all of the images in the
memory card. The LCD monitor displays each image for approximately
3 seconds.
Automated Playback (Slide Show)
1
Select [Slide Show].
1. Press the MENU button.
2. In the menu, use the S or T
button to select .
3. Press the FUNC./SET button.
2
Select an effect.
1. Use the W or X button to select ,
or .
3
Start the slide show.
1. Press the FUNC./SET button.
• The following functions are available during slide shows.
- Pausing/resuming the slide show: Press the FUNC./SET
button
- Fast forwarding/rewinding: Press the W or X button (holding
down the button will increase the speed of the fast forward)
- Stop the slide show: Press the MENU button
In Single Playback mode, you can start a slide show from the
currently displayed image by holding the FUNC./SET button
while you press the
button. Please note that if you do this
while the last image shot is displayed, the slide show will start
from the first image using the same date.