Supported target devices – Digilent 410-249P-KIT User Manual
Page 6
JTAG-HS2™ Programming Cable for Xilinx® FPGAs
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 6 of 6
Supported Target Devices
The JTAG-HS2 is capable of targeting the following Xilinx devices:
1. Ordered List ItemXilinx FPGAs
2. Xilinx Zynq-7000
3. Xilinx CoolRunner™/CoolRunner-II CPLDs
4. Xilinx Platform Flash ISP configuration PROMs
5. Select third-party SPI PROMs
6. Select third-party BPI PROMs
The following devices cannot be targeted by the JTAG-HS2:
1. Ordered List Item Xilinx 9500/9500XL CPLDs
2. Xilinx 1700 and 18V00 ISP configuration PROMs
3. Xilinx FPGA eFUSE programming
Remote device configuration is not supported for the JTAG-HS2 when used with Xilinx's iMPACT software. Note:
Please see the "Introduction to Indirect Programming – SPI or BPI Flash Memory" help topic in iMPACT for a list of
supported FPGA/PROM combinations. Note: Please see the "Configuration Memory Support" section of Xilinx
UG908 for a list of the FPGA/PROM combinations that Vivado supports.