D.A.S. Audio Aero 48 - Manual (Page 18)

When the boxes are flown the safety pins
must be inserted in the G2A48 slots. Now we want to
stack the boxes, so the next step is to release the pins
from the slots and introduce them in the G2A48 holes.
It must be done by first lowering the boxes till the
safety pins can be removed, then raise the boxes till
the holes fit together and finally insert the safety pins
again.
8
At this point the PL-48S_1 and the PL-48S_2
pieces are both connected to the box. There is only the
PL-48S_1 piece left to be attached to the platform.
Move the platform upwards till the holes in the PL-
48S_1 piece and the holes in the platform match
together. Then insert the safety pins (8).
G2A48
Stack Fly
G2A48
Lower the cluster till the platform is resting
on the floor.
9
1
12
11
10
3
4
2
G2A48
45
Aero-48
Manual del usuario/ User´s manual