D.A.S. Audio Aero 48 User Manual

Page 12

While the array assembly descends, the

rear of the enclosures will come together, at that
moment,

the safety pins which hold the G2A48

guides in place should be removed. Once removed,
the guides should be swung back into the box they
belong to. Finally, the boxes should be totally
detached from one another by releasing the G1A48
guide.

To lower the system, both hoists should be

used until the lowest box is about 1 meter from the
ground. From there on, only the front hoist should be
used so that the array assembly begins to lean
forward, at the same time, the PL-48 platforms should
be reattached. When the wheels of the lowest
enclosure are firmly on the ground, the array
assembly can now be lowered using the rear hoist.

3.5 ASSEMBLING AN ARRAY

USING THE PLATFORM PL-48S

The PL-48S platform can be used to easily

transport 3/4 units of the AERO-48; in both arc shape
or stacked on the platform.

The PL-48S platform has two types of

moving pieces. One of them is fixed (PL-48S_2) and
can only be swung around, the other is free (PL-
48S_1) and is joined to the platform by way of a safety
pin. The smaller piece PL-48S_1 attaches to the front
enclosure hardware and the larger PL-48S_1 attaches
to the back:

PL-48S_2

PL-48S_1

If we want to place six AERO-48 units on 2

PL-48S, the first step would be to suspend them all,
and then lower the array assembly onto the platforms
in groups of three.

Aero-48

Manual del usuario/ User´s manual

A) Cabinets splayed in arc (MAX. 3 units):

The PL-48S platform can be used to

transport boxes forming a vertical arc, ready to be
flown or simply stacked.

Either way, due to the weight of the boxes, it

is recommended that for the first time, the enclosures
be placed on the platform from a flown position. In
other words, the array should be suspended (either
one by one or using the PL-48S) and then lowered onto
the PL-48S in groups.

Lower the array until the lowest box is about

15 cm (aprox. 6 in.) above the PL-48S platform.

Release the PL-48S_2 piece by removing

the safety pins (1). Next, swing the pieces and
introduce them (2) into the rear rigging hardware of
the lowest box, securing them with the safety pin (3).

Last cabinet of the array

Units stacked on a PL-
48S.

Splayed units on PL-
48S ready to be rigged.

MAX. 4

units

MAX. 3

units