RCA COLOR TV NCJ11 - Manual (Page 27)

f'Changing Antenna Input
Your TV has two separate antenna
inputs on the back (labeled AVT A
and ANT B) that allow you to connect
two different signal sources if
desired. For example, you can
connect a cable-TV system to one
input and a home antenna to the other
input.
By changing the ANTENNA: A/B
display in the SETUP menu, you can
switch back and forth between the
two signal sources.
Listed below are some other common
uses of the two antenna inputs:
• connecting a cable-TV system (or
antenna) to one input and a VCR to the
other.
• connecting a cable-TV system (or
antenna) to one input and a video game
to the other.
• connecting a double-trunk cable
system to both inputs.
• connecting a cable-TV
converter/decoder box that scrambles
only premium channels. Connection
details are on pages 33-34.
• connecting a cable-TV system to one
input and an antenna (VHF/UHF) to
the other. This allows you to tune in
local stations that are not included on
your cable system. Remember to
change the CABLE/AIR function as
described on page 18 if using your set
like this.
The Channel Memory is the list of
channels your TV will stop on when
you press the CHANNEL up or down
buttons. Your TV provides two
separate Channel Memories-one for
ANT A input and one for ANT B
input. This allows you to add or
delete channels into each channel
memory as desired.
When you use iht AUTOPROGRAM
function, the TV automatically
checks both inputs and sets up a
separate channel memory for each.
Changing Antenna Input
(with remote)------------------------
1. Press the AVr (Antenna) button on
the remote control to switch from the
ANT A input to the AVr B input.
The color of the channel numbers
will change from blue to yellow to
let you know you are now watching
whatever signal is connected to the
ANT B jack on the back of the TV.
llluifor
lellow for
AM B
2. Press the ANT button again to switch
back to ANT A. The color of the
channel numbers will change back to
blue to let you know you are now
watching whatever signal source is
connected to the AVT A jack.
(without remote)
1. Repeatedly press MENU to select
SETUP MENU and then press +
or - to display setup functions.
Repeatedly press Mem to select
ANTENNA: A/B function.
X
.........
I Mute
Video»
Parental an Off
Chan Ctrl. Normal ■
Autoprogram ‘ . .
I Chan Mem; Stored
Antenna: A
2. Press the - or + button to change
the setting. The screen display
will change from A to B to let you
know you are now watching
whatever signal is connected to
the ANT B jack on the back of the
TV. The color of the channel
numbers will change from blue to
yellow.
E arentalCtrl Off
hanCtrl: Nonmat
’..-Autoprogram
I’.'ChanMem: Stored
; ■' f
. I’::
Antenna: B
3. Press the - or + button again to
switch back to ANT A. The screen
display will change back to
ANTENNA: A to let you know you
are now watching whatever signal
source is connected to the A/VF A
jack on the back of the TV.
. Parental Ctrl- Off
Chan Ctrl: Normal
Autoprogram
, Chan Mem: Stored
mmm
25