With remote only) – RCA COLOR TV NCJ11 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The channel guide feature lets you

display several channels at the same

time so you can quickly review what

programs are available.

Note: Channels 2-13 were programmed
into the channel memory at the factory.
These are the channels that will appear
during channel guide unless you
autoprogram the channel memory or add
and erase channels as described on
page 24.

Starting Channel Guide------------------

(with remote only)

To start channel guide, press the

CHAN GUIDE huiion.

Note: The remote control must be in the
“TV Mode”. Pressing the

button puts it

in the “TV Mode”.

• The screen will display all the

channels that are programmed into

channel memory, 12 at a time.

• Each little screen will display a stop-

action picture that will be

continuously updated.

• While the 12 channels are on the

screen, you can use the

ZOOM

button

to enlarge the picture and then use the

arrow buttons to move around the

screen. To return to normal size, press

OUT.

Note: When using the

ZOOM

feature,

you will see a mosaic pattern as the
picture is made larger.

' To select one of the channels being

displayed in the channel guide, press

the two corresponding number

buttons for that channel.

-Stopping Channel Guide----------------

• To select one of the channels being

displayed in the channel guide, press

the two corresponding number

buttons for that channel. That will

stop channel guide and take you

directly to the channel you selected.

' Another way to stop channel guide

is to press

CHAN GUIDE.

The little

screens will disappear, and the TV

will return to the original channel

you were watching.