Toshiba FS-160 SERIES User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DISPLAY

The front display is located at the top of the register just above the

keyboard. The rear display, located on the back side of the front display,
has the same layout and content as the front display.

NUMERIC DISPLAY

AMOUNT (7 digits):

DPT (1 digit):

Displays the numeric data, such as amount.

Displays the code No, (1 to 0) which represents each

Department Key (1 to 10). When Department No. 10 is

used, "0" is displayed instead of ''10".

RPT (1 digit):

Displays the repeat count of the same item.

MESSAGE DESCRIPTIORS (Tri-mark Lamps)

CLERK:

Lights up when a Clerk Key is set to ON status.

ALARM:

Lights up with an alarm buzzer to indicate that the last operation

or numeric entry has resulted in an error. To clear the error
condition, depress the

[ c ]

key,

Lights up when a previous balance is entered through the [PB+] key,

LIST*

indicating that the

sale contains a previous balance. It becomes

unlit when the [SERVICE] key is depressed.

It also lights up when the [LIST] key is depressed, indicating that

the Itemized Sale Mode and the Single-item Sale Mode are shifted

from one to the other.

CHK ^

Lights up

when an

amount is entered through the [CHK PD] key,

PD *

indicating that the

amount is to be paid in this sale sequence.

(-)/VD: Lights up when a subtracting amount through such keys as [$ DISC]

or [IC/VD] is entered.

SHORT

Lights up when the [ST/TT] key is depressed and the subtotal amount
of the sale is displayed.

It also lights when a short - tendering is operated with the balance

still due is displayed.

- 4 -