Toshiba FS-160 SERIES - Manual (Page 13)

LIST
This key is used to reverse the Single-item DP / Itemized DP operation
option by depressing before department or PLU transaction.
In case of the Single-item DP system, by depressing this key the
itemized department and PLU operation can be done. In case of the
Itemized DP system, by depressing it the single-item department and
PLU operation can be done.
LIST KEY ([LIST])
SLIP
SLIP KEY ([SLIP])
This key is used to change the gap condition of the slip printer.
When the gap is closed, depressing this key causes the gap to be
opened; and when it is open, depressing this key causes it to be
closed. To use it for this purpose, this key should be depressed
without numeric entries.
This key is also used to feed the slip paper to the appropriate
position. When the number of lines to be fed is entered before this
key entry, the slip paper is fed as much as the entered number of
lines.
DATE/#
DATE/# KEY ([DATE/#])
This key is a dual function key of Date Key and # Key. If depressed
without numeric entries, this key is the Date Key. And, if depressed
after numeric entries, it is the # Key.
The Date Key function is used to print the date and the register
number on slip and journal. After depressing this key, this
transaction should be the itemized transaction. When the options
"Date Print" and "Consecutive No. Print" are both on, the date and the
consecutive No. print automatically for every transaction; therefore,
the Date Key function is not usuaully necessary.
The # Key function is used to print any non-add numbers on slip and
journal as future referece for Customer No., Table No., Check No.,
etc. The maximum digits of entered numbers are 6 digits. The number
entered is shown by the "#" symbol on the slip and journal.
$ DISC
DOLLAR DISCOUNT KEY ([$ DISC])
This key is used to subtract an amount from the sale total such as a
discount during a sale. The amount more than the sale total is
prohibited.
To operate, enter the discount amount, and depress this key.
- 1 2 -