Unpacking your camcorder, Rechargeable 9.6-volt battery stock # bp96fl, Audio/video output cable stock # 194128 – RCA CC-285 User Manual
Page 6: Transformer (300-to-75 ohm) stock # ah055, Clock battery, Warning, Installing battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Unpacking Your Camcorder
• When you unpack the camcorder,
make sure you remove all the
accessories and information papers,
• Save the packing materials and box
in case you ever need to ship or
store your camcorder.
• The items shown below are packed
with your camcorder. If any of the
items are missing or appear
damaged, contact your RCA dealer
immediately.
Camcorder Model CC285
AC
Adapter/Charger
Stock # CPS09
Rechargeable 9.6-Volt Battery
Stock # BP96FL
Earphone
RF Output Adapter
Stock # CRF030
Audio/Video Output Cable
Stock # 194128
Shoulder Strap
Stock # 184449
Transformer (300-to-75 ohm)
Stock # AH055
Coaxial RF Cable
Stock # 177233
Audio/Video Input Cable
Stock # VAA004
Clock Battery
3-Volt Micro Lithium Cell
(such as Maxell #CR2025
available from most local
drugstores and camera
shops)
WARNING:
Keep this
battery away from children.
If swaJlowed, con.sull a
physician immediately for
emergency treatment.
- Installing Battery----------------
You may want to install the clock
battery immediately to prevent
misplacing it.
1. Locate the
CLOCK
battery
compartment on the back of
the camcorder.
2. Pull the tab to open the cover
and expose the compartment.
J
Battery
Compartment
CLOCK BATTERY
Compartment
3. Insert the clock battery
securely under the shoulders
with the “-I-” terminal facing
out {as illustrated inside the
battery cover).
4. Gently push the cover closed
until it snaps into place.
Instructions for setting the time
and date are on page 22. You can
do that later if desired after you’re
more familiar with your camcorder.