Recording features (coni.), R ) mzi, Focusing your camcorder г auto focus – RCA CC-285 User Manual
Page 26: Manual focus, R macro focus
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording Features (coni.)
Focusing Your Camcorder
г Auto Focus-----------------
AUTOFOCUS Switch
Auto Focua
Window
PUSH/AUTO Focus Switch
If you want the camcorder to focus
for you automatically, slide the
AUTOFOCUS
switch to the
auto
position.
The camcorder’s auto-focus system
sends out an infrared light beam
and automatically focuses on the
nearest object that reflects this
light. Take care not to block the
camcorder’s Auto Focus Window
while recording with the auto-focus
feature.
If any of the following conditions
exist, you may need to switch off
the auto-focus system and focus
manually by turning the focus ring.
To switch off auto-focus, slide the
AUTOFOCUS
switch to the
man
(manual) position.
• Sloping or inclined surfaces may
not be focused because the
reflected light will not be
returned to the auto-focus
window.
• When shooting through a
window, the auto-focus system
may focus on the window glass
instead of your subject.
• Dark objects, such as a subject’s
clothing, may absorb the
infrared light. Manual focus may
be required.
• Auto focus may not be able to
work reliably on subjects more
than approximately 35 feet away
from the camcorder.
• When using the optional wide-
angle or telephoto lens adapters,
turn off the auto-focus system
and focus manually. It is not
possible to use autofocus when
these adapters are being used.
Manual Focus-
AUTOFOCUS
Switch
PUSH/AUTO Focu* Switch
If you do not want the camcorder
to focus for you automatically,
shde the
autofocus
switch to the
MAN
(manual) position. You can
then adjust the focus as desired by
turning the Focus Ring with your
fingers.
(r ) mzi
)
PUSH/AUTO
MAN* »AUTO
Before you start
recording, zoom in on
your subject and adjust
the Focus Ring so that a
sharp, clear picture is
displayed in the viewfinder. (You
can zoom in on your subject by
holding the Power Zoom button
labeled “T”.) By using this
procedure for manual focus, the
camcorder will maintain proper
focus throughout the zoom range.
You can also quickly and
momentarily switch from
manual
to
auto
focus by pushing the
PUSH/AUTO
focus switch in while
the
autofocus
switch is in the
MANUAL
position. When the switch
is pressed in and held, automatic
focus is activated and remains
activated until the switch is
released. This is useful if you are
shooting a relatively static scene in
MANUAL
focus and need to quickly
and momentarily use
auto
focus to
adjust for a change in scene.
r Macro Focus-------------------
The macro focus feature lets you
focus on objects as close as 1/4
inch from your subject.
Macro Button
Zoom Ring
Lever
Zoom Ring
AUTOFOCUS Switch
1. Slide the
AUTOFOCUS
switch
to the
man
(manual) position.
2. Press in and hold the Macro
Button (on Zoom Ring Lever)
while rotating the Zoom Ring
to the
MACRO
position. (You’ll
see the word
MACRO
on the
zoom ring scale. Make it align
with the white line.)
3. Release the Macro Button
after the Zoom Ring is in the
MACRO
position,
4. Slowly rotate the Zoom Ring
with your fingers until you get
a sharp picture.
Notes:
• Zooming is not possible when in
Macro Focus. To change the size
of the subject, move the lens
closer or further away from it.
• The Focus Ring has no effect in
Macro Focus.
24